De CLF LEDbar PRO is een multifunctioneel lineair LED armatuur. Door de 25° beam angle kan het gebruik worden als wallwash, maar ook als per pixel aangestuurde effect.
- 10 individueel aanstuurbare LEDs
- Multifunctioneel rigging systeem
- Intense RGBW kleurenmenging
- 24° beam angle
- IP65
- RDM ready
- Artnet & sACN ready.
- Input Voltage & Rate 100-240V, 50/60hZ
- Standby power 10W
- Nominal Total Power Consumption(at Nominal voltage 230V) 237W
- Typical Current (at Nominal voltage 230V) 1.059A
- Cos φ 0,926
- Power Plug Type Seetronic PowerCON True
- LED Color RGBW
- LED Color Temperature 2500 – 10000 K
- LED CRI level
- Quantity of LED 10 pc
- Dimming frequency 600/1200/2400/4800/9600
- Dimmer resolution 16bit
- Beam angle 24 °
- Output @1M 9000 lux
- Output @5M 720 lux
- Cooling type: Fan
- MAX. Ambient temp (Ta max) 40 °C
- MIN. Ambient temp (Ta min) 25 °C
- MAX housing temp.(ta=25℃) 50 °C
- MAX housing temp.(ta=40℃) 95 °C
- AUTO program Yes
- Static Color Yes
- Manual Calibration Yes
- Factory calibration Yes
- Strobe speed 0 – 20Hz
- Random strobe Yes
- Control Protocol USITT DMX512/1990
- DMX Channel Range 4/6/10/11/12/40/4
- RDM Yes
- RDM compliance ANSI/ESTA E.120
- WDMX Optional
- ACN Yes
- DMX input connection DMX 5 pin in en out
- Data input (artnet, SACN) Yes
- Interface Backlite LCD display
- Software upload method XLR & RJ45
- Location Outdoor
- IP rating IP65
- Net product weight 10,2 kg
- Machine Dimensions – Length 1000 mm
- Machine Dimensions – Width 165 mm
- Machine Dimensions – Height 210 mm
- Included items
- Approved certifications
De verhuurprijs van de CLF LEDBar Pro is €20,- per stuk, per dag.
Bekijk HIER het complete overzicht van al onze producten en actuele prijzen of Neem contact op met onze specialisten op telefoonnummer 026 325 5392.